Basic Info.
Function
Automatic Control
Material
Engineering Plastic
Product Name
4-20 Ma Alalog Io Module
Applied New Energy
Solar/Photovoltaic-PV/Lithium Battery Industry
Applied Energy
Thermal Plant/Hydropower Station/Ptd
Applied Machinery Industry
CNC/Food and Beverage/Grain and Oil Machinery/Smar
Process Control
Sewage Disposal/Oil and Gas/Chemical/Pharmacy
Other Industry
Railway/ Robotic/Building/ HVAC
Supported Io Module
Di/Do & Ai/Ao
Optional Io Modules
Current/Voltage Input Output PT100/Thermocouple En
C/O
Sichuan Province, China
Certificates
CE, ISO9001:2015
Transport Package
Cartons
Specification
115*14*75mm
Product Description
Serial Port Communication Sub Module RS232 RS485 RS422 Data Acquisition Remote I/O Modules
CT-5321 Modbus Serial Port Module
Module Description
The Modbus serial port module supports 1 channel RS485/RS232 /RS422 (optional), supports Modbus RTU/ASCII protocol, and supports master, slave and free transparent transmission mode.
The serial Module CT-5321 could be applied with the adapter modules, so it could convert Modbus into other protocols such as Modbus TCP, Profinet, EtherCAT, EtherNet/IP, etc. When the module is used, serial port parameters and Modbus instructions should be configured in IO Config software.
Devices with RS485/RS232/RS422 interface, which support modbus-RTU /ASCII, could be applied with CT-5321 to realize interconnection with upper PLC or upper computers. CT-5321 could be applied with devices such as: PLC, DCS, remote IO, VFD, motor start protection device, intelligent high and low voltage electrical apparatus, power measurement device, intelligent field measurement equipment and instruments, etc.
Our remote IO model list:
CT-1228 (new) | CT-1228:8 channels digital Intput/24VDC/source type, NPN, supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input low level is valid |
CT-1218 | CT-1218:8 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
CT-121F | CT-121F:16 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
CT-222F | CT-222F: 16 channels digital Output, source, PNP, 24Vdc/0.5A,the output voltage is 24VDC, the output high level is valid |
CT-122F | CT-122F: 16 channels digital input, source, NPN, 24VDC, supports counting function(Max. counting frequency of 200Hz),the input voltage is 0V, the input low level is valid |
CT-221F | CT-221F:16 channels digital Output/24VDC/0.5A/sink type, NPN,the output voltage is 0V, the output low level is valid |
CT-124H | CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz) |
CT-222H | CT-222H: 32 channels digital output, source, 24Vdc/0.5A,34Pin male connector |
CT-2224 | CT-2224 4-channel digital output ,Source type, 5.5-40VDC ,single channel Max output. 3.3a /4 channel with Max output. 2A per channel. Channels can be used in parallel |
CT-2228 | CT-2228:8 channels Digital Output ,source,PNP,24Vdc/0.5A, the output voltage is 24VDC, the output high level is valid |
CT-2718 | CT-2718:8 channels Relay Output ,( 9~30Vdc@2A,110Vac@0.55A, 250Vac@0.25A) |
CT-3168 | CT-3168:8 channels Analog Input,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,15 bits/16 bits,Single-end |
CT-3238 | CT-3238:8 channels analog input/ 0& 4-20mA/15-bit,single ended |
CT-3268 | CT-3268:8 channels analog input/-20~20mA/15-bit,single ended |
CT-3713 | CT-3713:3 channels Analog Input,RTD(PT100) |
CT-3723 | CT-3723:3 channels Analog Input,RTD(PT1000) |
CT-3804 | CT-3804:4 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
CT-3808 | CT-3808:8 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
CT-4154 | CT-4154:4 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
CT-4158 | CT-4158:8 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
CT-4234 | CT-4234:4 channels analog output, 0& 4-20mA/16-bit,single ended |
CT-4238 (new) not available for sale | CT-4238:8 channels analog output, 0& 4-20mA/16-bit,single ended |
CT-5102 | CT-5102: 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 5V output, 32bit, Max input frequency of 1.5MHz2 way 5V output, 32bit, Max input frequency of 1.5MHz |
CT-5112 | CT-5112: 2 channels encoder/24V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 24V output, 32bit, Max input frequency of 1.5MHz. |
CT-5122 | CT-5122: 2-channel encoder/SSI input |
CT-5142 | CT-5142: 2-channel encoder/differential input/quadrature decoding, direction pulse, high-speed counting, 2-channel DI, 2-channel DO, 32bit, maximum input frequency 10MHz |
CT-5321 | CT-5321:serial port communication sub-module (RS232, RS485,RS422, either serial port is optional, it supports modbus-RTU /ASCII,master or slave mode, transparent transmission mode) |
CT-5711 | CT-5711:Fieldbus Extended Master Module( CT-5711 need work with CT-5721) |
CT-5721 | CT-5721:Fieldbus Extended Slave Module ( CT-5711 need work with CT-5721) |
CT-5801 | CT-5801:Terminal module as extra module, take no module channel, ( required for each network adapter) |
CT-623F | CT-623F:8 channels / digital input / 24VDC / source or sink type &8 channels / digital output / 24VDC / source type, single output channel max current 500mA |
CT-7220 | CT-7220:Expansion power Supply( System power input 24Vdc,Output 5Vdc/2A,Field power input 24Vdc,Output 24Vdc/8A) take no module channel. CT-7220Power Supply Extension Module required as BOM included a 15 module rack, aslo IO Config software noticed the decreasing "Total Residual Current", |
MTE034 | MTE034: Din Rail, 32 channels male connector,spring terminal connection ( accessories for CT-124H and CT-222H ) |
DX210-3SFX-2000 | Length 2 meters, flame retardant material, flexible wire, both ends are female connector ( accessories for CT-124H and CT-222H ) |
Product Parameters
General parameters |
Power | Max.500mA@5.0Vdc |
Isolation | I/O to internal bus: opto-couple isolation (3KVrms) |
Field Power | Nominal:24Vdc, Range:22-28Vdc |
Wiring | I/O Wiring:Max.1.5mm²(AWG 16) |
Mounting Type | 35mmDIN-Rail |
Size | 115*14*75mm |
Weight | 65g |
Environment Specification |
Operational Temperature | -40~85ºC |
Operational Humidity | 5%~95% RH(No Condensation) |
Protection Class | IP20 |
Serial Port Parameters |
M/S/F:Channel Number | 1Channel |
M/S/F:Interface | RS485/RS232/RS422 |
M/S:Protocol | Modbus RTU/ASCII |
|
M/S/F:Working Mode | Modbus Master, Slave, Transparent Transmission |
|
M/S/F:Baud Rate | 300bps-500Kbps |
M/S/F:Data Bit | Bit 7, Bit 8 |
M/S/F:Parity Checking | None, Odd, Even |
|
M/S/F:Stop Bit | Bit1, Bit2 |
M/S/F: Character Interval | 1.5t-200t |
F: Byte Order Conversion | Prohibit, Enable |
M/F:Response Timeout | Customized,default:1000 |
M/F: Polling Timeout | Customized,default:100 |
M: Read Data Processing Mode | Hold the last input value, clear the input value |
M: Data Output Mode | Polling, event triggering (data changes) |
M: Module Control Enable | Prohibit, Enable |
M: Module Control Mode | Level trigger (continuously valid), rising edge trigger (single valid) |
M: Power on Event Output | Prohibit, Enable |
S:Slave ID | Customized,default:1 |
S:Response Time | Customized,default:50 |
Topology
Dimension
Wiring terminal
Installation
DIN-rail
Application
1.How could i get the manual, technical detail and software?
You can click the software & manual page to download the realted product details or contact us to get it.
2.Do you have after sale support?
Yes we provide all the realted technical support including remote support.
And We will provide you any necessary online training and support too.
3. What is the warranty?
All the ODOT products is with the warranty of 3 years.
Only ODOT-S7PPI/PPI V2.0 is with a warranty of 1 year.
4. How is the payment terms?
100% T/T in advance.
5. What is your shipping channel?
We support all the main stream courier company including: Fedex, TNT, DHL, UPS, and Aramex.
6. What is your lead time?
We will arrange the delivery in 1~ 2 day if we have finished products in stock.
If we have no stock and the lead time will be 1~2 weeks.
7. Do you provide any customized services?
Yes, please contact us with your application details.
We accpet deep customized services including OEM, ODM and there will be a MOQ.
8. Do you accept cooperation as distributors?
Yes, partner and distributorship inquiry are warmly welcomed.
Address:
#204 Mianyang Comprehensive Bonded Zone, No. 261Eastern Section of Feiyun Avenue, Sichuan Province, Mianyang, Sichuan, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Computer Products, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing, Textile, Transportation
Management System Certification:
ISO 9001
Company Introduction:
ODOT automation offers reliable, stable and bankable solutions to help you simplify your production process.
As a national high-tech enterprise, we are specializing in industrial communication product R& D, industrial automation control system design, integration and technical services. We are also a member of PROFIBUS & PROFINET Association (PIChina), EtherCAT Technology Association, CC-Link, OPC, CCIA, Industrial Internet Alliance and other associations. And our mentor Kevin Wang LED us all the way until now since we started as a technical company.
In the Past in 2003, ODOT Automation was founded by Mr. Wang, and started as a project company in the Mianyang City.
We built projects with a widely range from PA to FA by our engineering team, and during these time we found profit is dropping while materials keeps on going.
This causes less competitive for our project and Mr. Kevin decided to change everything.
In 2013, we started to build our product with the years of experience we gained from the project.
The first product is ODOT-DPM01, a modbus-RTU to Profibus-DP gateway. And immediately in response to market demands we have developed an all-encompassing automation data solution from controller to sensors and actuators to I/o system via the most popular fieldbuses and ETHERNET standards.
In 2021, Our first PLC based on Codesys was test successful, and in 2022 it will be ready in the market.
In these years of experience, at the beginning we have started from 11 employees to today with 30 technicians and to 70+ employees. We have built a long-term relationship and trust with our customers. We are always happy to provide value added services to beyond customer requirements and expections.
In the future, we will keep Innovation and development more products with "Wieldy, Appearance, Affordable and in-depth tailored services to meet cunstomer requirements"